Water Bottling Plant

Purpose: For automatic registered printing on labels, pouches, cartons tins, boxes, bottles (curvature) etc.

PRE-TREATMENT FOR R.O. STREAM FINE FILTRATION FOR CONDITION R.O. FEED TO ACHIEVE IDEAL SDI < 3 PLACED AFTER FINE FILTRATION UNIT.

BASIS OF DESIGN AND CAPACITY
OBJECT:
To commission a Mineral water plant 3000 liters per hour.

ASSUMPTIONS:
No. Of working days :360 days
No. Of working hours :10-16 hours
Capacity utilization :91-95%

INPUTS (Raw water Quality):
Total Dissolved Solids : < 1500 PPM

OUTPUT (Treated Water Quality):
Total Dissolved Solids : < 50 PPM

FINAL OUTPUT TDS : As Per requirement

TREATMENT PROCESS – HIGH DEGREE OF OXIDATION BY REACTIVE OXYGEN OF OZONE FOR LONG SHELF LIFE.

MAIN FEATURES:

• High Barrier Quartz Dielectric has high operation life (minimum 3years life, at high ozone concentration) High Barrier Quartz have high breakdown temperature (12000 C) excellent resistant to ozone and high frequency dielectric strength
• Water Cooled to give constant ozone output
• IGBT based higher frequency residual inverter for high ozone concentration at lower power PWM design to withstand wide voltage fluctuation
• Over voltage and sewage protection
• Interlock Protection for no feed gas and loss of cooling Optional PLC Controller
• Oil Filled high Voltage transformer for long life
• All the machines are checked using state of art ozone sensors.(UV adsorption based)
• All the inverter under goes series of tasting, using oscilloscope LCR Meters, and high voltage breakdown meters to ensure trouble free performance

STAINLESS STEEL TANK FOR OZONATION & STORAGE

PROCESS – For fine filtration and conditioning of product water and to make the Product water crystal clear, shining and fresh.

Purpose To sterlize the water and to make the water Ecoli/Bacteria free and microbial free.